Blog #7

Hours Completed Today: 4

Total Hours Completed: 26

May 23, Monday

 As my Kart is close to being finished there were a few things Gordan and I wanted to fix. First Gordon helped me re-work my brakes. This meant completely welding off where my brakes attached. Then welding on a new bar for the brake clamp to hold on to. I also worked with Greg in the woodshop on making a plywood mount for my seat covers. This meant cutting out the correct size sheet and also drilling holes so that I can use 1/4 in bolts to mount the plywood to my frame. 

Comments

Post a Comment

Popular posts from this blog

Blog # 4

Image
Total Hours Today: 4 Total Hours Completed: 14 Thursday, May 19th Today I spent most of my time fixing what I did yesterday. I had to redo my brake and throttle setup. This means that I had to re-weld everything as well. I also planned a few things out for the future. I had not gotten to my seat as quickly as I thought I would and I ended up redesigning that as well.
Read more

Blog #6

Image
Hours Completed Today: 4 Total Hours Completed: 22 May 21, Saturday Today I had to finish up the work on my spindles that Sayer had started. This meant cutting and drilling new pieces. Gordon also helped me with widening the hole that my bolt for my spindle goes into. This is to help lessen the stress put on the pieces when turning. I realized that the slot I milled into my throttle cable holder was on the incorrect side. So I had to make another channel. I also created my seat cushions. This was done with foam, fake leather, and cutouts.                                                                      New Spindles Seat Cushions
Read more